01902 239107Discuss Your Requirements
FEFCO 02 · Slotted Boxes

FEFCO 0200Half slotted container

A regular case with closing flaps at one end only. Can also be used upside down as a cap or lid. Requires taping or gluing to seal.

Check the right board for this style Request a Quote
Line drawing of FEFCO 0200 Half slotted containerFEFCO 0200
Specification

At a glance.

FEFCO code
0200
Series
02 · Slotted Boxes
Closure
Flaps at one end only; taped or glued
Tooling
Usually made without a cutting die
Supplied
Flat, with a glued, taped or stitched joint
Typical board
Single or double wall, depending on load

Common uses

  • Base or lid in two-piece packs
  • Top-loading cases on packing lines
  • Covers for tall or bulky products

Choose FEFCO 0200 when

  • You need an open-top case or a separate cap
  • The product is loaded from above
  • You want to pair it with a lid or sleeve

Things to consider

  • Needs a separate closure if the contents must be enclosed
  • Specify internal dimensions carefully when used as a lid
How to specify

What to include in your specification.

A FEFCO code describes the shape. A complete specification also needs the details below.

  1. 01

    Internal dimensions

    Length × width × height in millimetres, measured inside the box.

  2. 02

    Board grade and flute

    Liners, flute and grammage. See understanding board grades.

  3. 03

    Joint and closure

    Glued, taped or stitched joint, and how the box will be sealed.

  4. 04

    Print and finish

    Colours, print method and coatings. See our printing capabilities.

  5. 05

    Volumes and delivery

    Annual volume, call-off pattern, pallet configuration and delivery sites.

Related styles

Compare similar box styles.

View all FEFCO styles

FEFCO 0201 Regular slotted containerFEFCO 0201Regular slotted containerThe most common transit case (RSC)FEFCO 0203 Full overlap slotted containerFEFCO 0203Full overlap slotted containerFully overlapping flaps for extra strengthFEFCO 0427 Die-cut postal boxFEFCO 0427Die-cut postal boxSelf-locking box with side flapsFEFCO 0713 Crash-lock base case with tuck lidFEFCO 0713Crash-lock base case with tuck lidReady-glued case with hinged lid
Questions

Frequently asked questions

What is a FEFCO 0200 box?

FEFCO 0200 is the half slotted container. A regular case with closing flaps at one end only. Can also be used upside down as a cap or lid. Requires taping or gluing to seal.

What is FEFCO 0200 used for?

Typical uses include base or lid in two-piece packs; top-loading cases on packing lines; covers for tall or bulky products.

Does FEFCO 0200 need tooling?

Usually made without a cutting die. Tooling requirements can vary with size and design, so confirm with your supplier.

What board grade should I use for FEFCO 0200?

Typically single or double wall, depending on load. The right grade depends on product weight, stacking, distribution route and storage conditions. Try the RightBox Box Finder for an indicative recommendation.

Next step

Need FEFCO 0200 boxes?

Tell us about your product, volumes and sites. We’ll confirm the right construction, board and print, and supply it through our partner network.

Discuss Your Packaging Requirements Try the Box Finder